![Sandstrom SID60W14N Скачать руководство пользователя страница 24](http://html1.mh-extra.com/html/sandstrom/sid60w14n/sid60w14n_installation-instructions-manual_3908215024.webp)
24
INSTALLATION
GB
19. Make sure your plumbing is suitable for use with
the dishwasher. If in doubt contact a qualified
plumber. This unit MUST BE connected to COLD
WATER MAINS using the new water inlet hose.
OLD HOSE SETS MUST NOT BE RE-USED. The
water pressure from the water mains needs to
be at a minimum of 0.04 MPa and a maximum of
1.00MPa.
• Connect one end of the safety water supply
hose to your dishwasher, and then connect
the other end of the hose to your water
mains. Please ensure the black rubber seal is
in place.
• After connecting the hose, turn on your water
mains and check for leaks.
• Connect the dishwasher to the mains socket.
18. Insert the toe panel to the dishwasher.
17. Attach the toe panel mounting brackets to the
toe panel. Align the screw holes, then using the
4 screws ST4x14 to secure the toe panel.
Water mains
Y-Adaptor
(not included)
Connect
to another
appliance if
required.
Water supply hose
You may use a Y-Adaptor (not included)
for an additional water feed for another
appliance, for example a washing machine.
This is only applicable for cold water mains.
A Y-Adaptor is available from most DIY
stores.
About the Water Supply Hose
The water supply hose consists of
the double walls. The hose’s system
guarantees its intervention by blocking
the flow of water in case of the supply
hose breaking and when the air space
between the supply hose itself and the
outer corrugated hose is full of water.
SID60W14N_IB_5L_140605_grace.indb 24
5/6/14 12:16 pm