25
AUX IN/MP3 LINK Operation
AUX IN Operation
There are AUX IN (L/R) sockets located at the rear of the unit. Analogue audio sound signals
from other sources can be connected to the unit through these sockets.
1. Connect to another audio device using the AUX IN (L/R) sockets via a RCA stereo audio
cable (not included).
2. While in the ON mode, press the FUNCTION function on the unit or press the AUX
button on the remote control to select AUX mode.
3. Press the VOL + / – buttons to adjust the volume to your desired level. You may also
need to increase the volume on your auxiliary device.
4. In AUX mode, operate your audio device directly for playback features.
MP3 LINK Operation
1. Connect to another audio device using the MP3 LINK socket via a 3.5mm AUX IN cable.
2. While in the ON mode, press the FUNCTION dial repeatedly on the unit or press the
MP3 LINK button on the remote control to select MP3 LINK mode.
Setting the Clock and Alarm
Manually Setting the Clock
Manual Setting of the clock can only be done in STANDBY mode.
1. In STANDBY mode, press and hold the CLOCK button, ‘CLOCK SET’ will scroll across the
display, then ‘24HR’ will flash.
2. Press the VOL + / – to select 24 or 12 hours, then press CLOCK.
3. Press the VOL + / – to set the hours, then press CLOCK.
4. Press the VOL + / – to set the minutes, then press CLOCK.
• If no buttons are pressed for 90 seconds the unit will exit clock setting mode.
• If your unit is disconnected from the mains supply the clock setting will be lost.
Time Display
• During ECO-Power mode, press the CLOCK button to display the clock for 90 seconds.
• While the unit is on, press the CLOCK button to display the clock for 3 seconds.
SDBXHFB13_IB Sandstrøm.indd 25
15/05/2013 13:26
