
21
Wiring the hob
• If the mains cable is damaged and needs to be replaced, this should be done by a qualified
person using the proper tools, so as to avoid any accidents.
• The ceramic hob must be connected directly to the mains supply, an omnipolar circuit
breaker must be installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
• The mains cable must not be bent or compressed.
• The mains cable must be checked regularly and only replaced by a qualified person.
• Before proceeding with the electrical connection, verify that the current carrying capacity of the
system and the socket is adequate for the maximum power rating of the hob.
• Electrical installation of the residence and the electrical current plug in use must be earthed and
conform with safety regulations.
• If there is no dedicated hob circuit and fused switch, they must be installed by a qualified
electrician before the hob is connected.
• Fused switch must be easily accessible once the hob has been installed.
• Do not use adaptors, multiple sockets and/or extension leads.
• A circuit breaker with a contact opening of at least 3mm, rated 32A and delayed functioning
type must be installed inside the supply circuit.
• For the vitroceramic hob, the cable must have these minimum specifications. Type
H05VV-F or H05RR-F 4X1.5mm
2
for 3 phase or 3X4mm
2
for single phase. You will find the
connection diagram shown on the bottom of your appliance and in this instruction book (for
single phase connection).
• Make sure the cable is routed away from hot parts of the hob.
• An incorrect connection might damage your appliance. The guarantee will not cover such
damages.
• All repairs must be carried out by an authorised service personal or a qualified electrician.
• Make sure your hob is disconnected from the mains supply before any maintenance.
• Cooking hobs are not provided with a supply cord.
SCEHOBB13/W13_IBv1.indd 21
23/05/2013 09:52