Sandstrom SBTB14, Инструкция по эксплуатации, Страница: 14 / 20

14
Bluetooth® Operation
The unit has a Bluetooth function that can receive a signal within 8 metres.
Pairing the unit with a Bluetooth device to listen to music:
1. While in the ON mode, the unit is entering the bluetooth pairing mode.
2. Activate your Bluetooth device and select the search mode.
3. “SBTB14” will appear on your Bluetooth device list.
4. Select “SBTB14” and enter “0000” for the password if necessary.
5. The Bluetooth button will illuminate when connection successful.
6. To disconnect the Bluetooth function, disable the function from your Bluetooth device.
NFC Operation
NFC is a one touch way of pairing your NFC device via Bluetooth to your speaker.
1. Activate NFC on your mobile device.
2. Place the NFC sensor area on the device close to the unit’s NFC sensor area (it will work
best within 10 mm) to connect your device to the unit.
3. Place the NFC sensor area on the device close to the unit’s NFC sensor area again to
disconnect Bluetooth connection.
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing mode
automatically.
• For better signal reception, remove any obstacles between the unit and the Bluetooth device.
• This unit supports A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio Video remote
Control Profile) functions. This can only be paired with one Bluetooth device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the Bluetooth function may connect and disconnect as you make and end
calls. This is not an indication of a problem with your unit.
If you are trying to pair your speaker to a mobile device and your mobile device shows the message ‘
failed to connect and password is incorrect’, then switch the unit off at the mains switch, wait 1 minute
then switch the unit back on. Try pairing again using bluetooth or NFC modes.