12
Wall Mounting
Screw
Screw
Assembly is required. Installation must be carried out by qualified personnel only. Incorrect assembly can
result in severe personal injury and property damage (if you intend to install this product yourself, you
must check for installations such as electrical wiring and plumbing that may be buried inside the wall).
The supplied wall bracket is only for use on vertical walls constructed from solid brick, solid concrete,
solid wood, solid wooden battens, drywall, plaster wall and lath wall. It is the installer’s responsibility to
verify that the wall will safely support the total load of the Soundbar and wall bracket. Additional tools
(not included) are required for the installation. Do not overtighten screws. Keep this instruction manual
for future reference.
1. Remove the base stand from the unit.
Ensure all cables to the main unit are disconnected before installing or removing the base stand.
2. Attach the wall bracket to the unit with the 2 screws removed from the base stand
following the diagram below.
Wall bracket
Base stand
S42SWLH13_IB_RC_130531_Michelle.indd 12
31/5/13 5:28 PM