Sandstrom S40LDIB10, Инструкция по эксплуатации

Страница: 25 / 48

GB-23
Pr
epar
ation
Connec
tions
Initial
Setup
U
sing
the
Fea
tur
es
U
sing
the
Fea
tur
es
via
USB
por
t
H
in
ts
and
Tips
, Specifica
tion
and
Saf
et
y
W
ar
nings
Aspect Ratio Zoom This selection will allow you to view the picture without
any alteration, while filling the entire screen. However,
the top and bottom of the picture will be cropped.
Smart
Zoom
This selection is similar to 16:9 mode, but shows more
of the horizontal sides and clips off a little from the top
and bottom.
Dot To Dot
(HDMI
Mode only) This selection will detect the resolution of the HDMI
signal and display an image with the same number of
pixels.
Noise Reduction Select to reduce the noise level of the connected device: Auto / High / Standard / Low / Off.
(TV mode)
MEMC (Motion
Evaluation and Motion
Compensation)
An advanced feature to improve the perception of moving images: Off / Strong / Normal /
Weak.
Press the
3. Menu button to return to the previous menu.
Press the
4. Exit button to exit the menu.
Customising the Sound Setting
Allows you to select an audio-enhancement technique.
Press the
1. Menu button and then press the buttons to select the
Sound menu.
Equalizer
Press the 2. button and then the buttons to select the following options.
Press the buttons to adjust each option’s setting.
Sound Mode Allows selection of an audio-enhancement technique: Standard / Speech / User / Music.
Alternative
You may press the Sound button to select the sound mode directly.
Equalizer Allows adjustment of each sound component, low to high frequency: 120Hz / 500Hz / 1.5KHz
/ 5KHz / 10KHz.
Balance
Adjusts the relative volume of the speakers in a multiple speaker system.
AVC (Automatic
Volume Control) Volume levels are automatically controlled. (e.g. advertisements tend to be louder than the
programmes)
SPDIF Output Allows selection of Digital Optical Audio output: PCM / AC3 / Off.
Press the
3. Menu button to return to the previous menu.
Press the
4. Exit button to exit the menu.