Sandstrom S40LDIB10, Инструкция по эксплуатации

Страница: 17 / 48

GB-15
Pr
epar
ation
Connec
tions
Initial
Setup
U
sing
the
Fea
tur
es
U
sing
the
Fea
tur
es
via
USB
por
t
H
in
ts
and
Tips
, Specifica
tion
and
Saf
et
y
W
ar
nings
Turning the TV On for the First Time
Connect the mains cable to the mains socket after you have 1.
completed all the connections.
Switch on the 2. I/O POWER ON/OFF switch at the bottom of the
TV. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
Touch the touch control panel of the TV once to activate it 3.
(indicator on the touch control panel will illuminate), and then
press the touch sensitive control on the touch control panel or
press the button on the remote control directly to turn the TV
on. The red LED indicator will flash for a few seconds.
Always disconnect the TV from the mains socket when not in use for a long period of time.
The button is only used for switching the TV into standby, it does not disconnect the TV from the mains power.
To completely disconnect the mains power, please remove the mains plug from the mains socket or switch off the
I/O POWER ON/OFF switch.
The first time you turn the TV on, it will go straight into the 4.
Installation Guide menu. (If you have already installed the
TV using the Quick Start Guide, please go to the next step
"Selecting the Input Source" on the next page.)
Press the 5. button to highlight Mode Setting and then press
the buttons to change the mode setting.
Home Mode
Designed for home viewing.
(All user settings are saved after switching off the
TV.)
Installation Guide
Mode Setting Home Mode
Language English
Country UK
Auto Install
Select Adjust Return
Shop Mode
Designed for in shop viewing.
(Picture settings are not saved after switching off
the TV.)
A pop-up screen will be displayed if shop mode
is selected. Press the button to select "Yes" on
screen and then press the OK button to confirm.
Installation Guide
Mode Setting Home Mode
Language English
Country UK
Auto Install
Select Adjust Return
In Shop Mode, your settings will not be saved.
Are you sure to select Shop Mode?
Yes No
Press the
6.
button to highlight Language and then press the
buttons to select the your desired language to be displayed
on the menu.
Initial Setup
Installation Guide
Mode Setting Home Mode
Language English
Country UK
Auto Install
Select Adjust Return
I/O
To mains socket
LED indicator