1
Unpacking
4
Connections
2
Battery Installation for the Remote Control
3
Attaching Speaker Covers
6
Setting the Clock
5
First Time Turning the Unit On
If the unit is connected to the mains power and then switched on from
standby for the first time, the unit will automatically enter into the DAB
mode and perform auto scan function. During the scan the display will
show “Searching…” together with a slide bar that indicates the progress
of the scan and the amount of stations that have been found so far.
Once the scan has finished, the unit will select the first alphanumerically
found station. To explore the found stations, tap the
icons on the
unit or press the
buttons on the remote control.
Selecting Modes
• Tap the CD/iPod/USB/CARD icon on the unit or press the
CD/iPod/USB/CARD button on the remote control repeatedly to
switch between CD, iPod, USB and CARD modes.
• Tap the DAB/FM/AUX icon on the unit or press the DAB/FM/AUX
button on the remote control repeatedly to switch between DAB, FM
and AUX modes.
The Main Unit
Speakers x 2
Speaker covers x 2
Instruction Manual
Quick Start Guide
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to any local regulations.
Micro Hi Fi System with DAB+ Radio and
Docking for iPhone/iPod
GB
Thank you
for purchasing your new
Sandstr
Ø
m Micro Hi-Fi System with DAB+
Radio and Docking for iPhone/iPod.
Please follow this quick start guide for a
successful first time set up.
We recommend that you spend some
time reading the instruction manual in
order to fully understand all the opera-
tional features it offers.
Read all the safety instructions carefully
before use and keep the instruction
manual for future reference.
(iPhone/iPod not included)
S1MDABI11E
1. Press and slide the back cover to
open the battery compartment of
the remote control.
2. Insert two AAA size batteries (not
included).
3. Close the battery compartment
cover.
Auto Setting the Clock
When you first turn on your radio it will automatically set the time by
searching out the DAB signal. It will continue to search for the clock whilst
in DAB mode until it has managed to set the time. If after 10 minutes the
clock has not automatically set itself try repositioning the radio to get a
better reception.
Manual Setting the Clock
When you first connect the unit to the mains socket. The unit will be in
STANDBY mode, and the display will show “— : —”.
1. During standby mode, tap and hold the ID3/MEM/C-ADj. icon on the unit
or press the ID3/MEM/C-ADj. button on the remote control until the
hour digits flash on the display.
2. Tap the icons on the unit or press the buttons on the
remote control to adjust the hour digits, and then tap the
ID3/MEM/C-ADj. icon on the unit or press the ID3/MEM/C-ADj. button
on the remote control to confirm. The minute digits will flash on the
display.
3. Tap the icons on the unit or press the buttons on the
remote control to adjust the minute digits, and then tap the
ID3/MEM/C-ADj. icon on the unit or press the ID3/MEM/C-ADj. button
on the remote control to confirm. The clock setting is now complete.
Install the batteries correctly by following the polarity (+ and -) indications in the
battery compartment.
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the
instruction manual provided.
Tip:
(P.N.: 227-8081LF-123)
Quick Start Guide
Remote Control
Connecting
to the Mains
Supply
Speaker Connections
Connect the speaker cables at the rear of the speakers to the speaker
sockets / at the rear side of the unit.
1
1
Connecting to the Mains Socket
Connect the mains cable at the rear of the main unit to the mains
socket.
2
2
Switching the Unit into Standby Mode
Switch the POWER ON/OFF switch at the rear of the main unit to the
“ON” position.
3
3
Switching the Unit ON
Press the STANDBY/ON button to switch the unit on.
4
4
1
2
S1MDABI11E_QSG_5L_120724_Zell.pdf 1 24/07/2012 11:57 PM
