Activating the Alarm Function
1. To activate the alarm function, press the ALARM/SNOOZE button repeatedly, the
alarm wake-up mode will be displayed and change in the below sequence on every
press:
2. When the display shows your desired alarm wake-up mode, release the button, the
alarm function is now activated and the alarm icon will be displayed.
3. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon
in the display will flash to indicate that the alarm is triggered. To stop the alarm sooner,
press the STANDBY/ON button.
4. To check the alarm status, press the ALARM/SNOOZE button once and the alarm
status will be displayed.
Automatic Alarm Repeat
The alarm will automatically repeat each day at the selected time as long as the alarm icon
is displayed. To cancel this function, repeatedly press the ALARM/SNOOZE button until the
display shows “Alarm Off”.
Snooze Function (AC Operation Only)
When the alarm has triggered, press the SNOOZE button to temporarily switch off the
alarm for 5 minutes. The display will show “Z” to indicate that snooze is on. Snooze function
will continue for 1 hour from the set alarm time.
If you have activated the alarm function and the wake-up mode is DAB or FM,
make sure you have set the Radio preset station first and the volume is at a
sufficient level for you to hear.
14
GB
S1DAB11E_IB_5L_RC_130820_Zell.indb 14
20/8/13 9:28 AM