S&S Precision LIFTR Series, Руководство пользователя, Страница: 15 / 23

LiftR 40™
(LR-0001BK)
Attachment Instructions - LBT 6094
The LiftR™ is an in fl atable fl otation system used in surface and subsurface operations, providing the appropriate amount of lift necessary to bring a diver/swimmer to the surface and fl oat them
in a face-up orientation. It is attached to existing combat equipment by slipping it on and over the shoulder straps and cummerbund of the operator’s plate carrier. The LiftR™ is self-packing
and will
fi t most plate carriers. These instructions speci fi cally relate to the LBT 6094 carrier.
1.Weave the included female buckle straps into the MOLLE/
PALS webbing on the back of the carrier. Buckle ride height
can be adjusted to preference once the LiftR is assembled. 2. Feed the strap back up through the tri-glide and tighten. 3. Feed the end of the strap back through the other end
of the tri-glide to secure the buckle in place.
Step 2: LiftR 40™ LBT 6094 Attachment Instructions
7. Pull strap completely through loop as shown. 8. Begin weaving the end of the strap through the tri-
glide on the back plate bag. 9. Continue to weave the strap down through the tri-glide
and pull excess length through.
12. Repeat with other shoulder strap and adjust to
preference if needed. 11. Continue to pull strap through LiftR and fasten Velcro. 10. Pass strap back up through the grey webbing loop
and begin feeding the excess length through.
13. Feed the LiftR’s cummerbund strap under the
carrier’s cummerbund and fasten side-release buckle. 14. Attach the LiftR’s back section to the buckles from
steps 1-4 and adjust straps as needed.
4. Repeat with the other buckle. Be sure to space the
buckles two MOLLE/PALS columns apart, centered on
the carrier..
5. Detach shoulder straps from back plate
bag. Position front plate bag over the LiftR
with straps lying
fl at. Pass shoulder strap
through 2nd webbing loop on the front of the LiftR. Be
sure the Velcro Hook is facing down towards the LiftR.
6. Continue to feed the shoulder strap through the LiftR’s
fi rst grey webbing loop.
5
b
w 5
b
w
Back plate bag
shoulder buckle.
Area shown