Installation, Operation & Maintenance Manual Merlin Detector i-S
Iss: 1 170322
12
Installation Details
Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all Merlin gas detection equipment be commissioned by competent/trained engineers to ensure
correct installation and operation. The Merlin range of gas detectors are calibrated when manufactured, however, we
strongly recommend the detectors response and alarm signals are tested and validated once installed. This will
ensure the equipment performs as intended and is free from any unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, S&S Northern can assume no responsibility for any
errors or omissions in this document or their consequences. S&S Northern would greatly appreciate being informed of any
errors or omissions that may be found in the content of this document. For information not covered in this document, or if
there is a requirement to send comments/corrections, please contact S&S Northern using the contact details given below.
S&S Northern Limited
www.snsnorthern.com
S&S Northern Head Office
Tel: +44(0) 1257 470 983
Email: [email protected]
Southeast Division
Tel: +44(0) 1702 291 725
Email: [email protected]
S&S Northern is the owner of this document and reserves all rights of modification without prior notice.
