![S&P JENcoFAN L100 Скачать руководство пользователя страница 39](http://html1.mh-extra.com/html/sandp/jencofan-l100/jencofan-l100_installation-operation-and-maintenance-manual_793457039.webp)
2
Losone Select Ceiling Mount Ventilation
Models: L900 & L1500
TYPICAL INSTALLATION
TYPICAL INSTALLATION
GRILLE
SCREW
12” ROUND DUCT
Ventilator
factory-shipped
in horizontal
discharge
position.
8” X 12” TO
12” ROUND
TRANSITION
MOUNTING
BRACKETS
factory-shipped
in position for
½” ceiling
material.
CEILING
JOIST
(24” centers
shown)
GRILLE
(Install after ceiling is finished.)
GRILLE NUT
(Install into square
holes in housing)
WIRING
PLATE
WHITE
TO
WHITE
BLACK
TO
BLACK
EDGE
OF HOUSING
120 VAC LINE IN
GROUND TO
WIRING PLATE
ROOF CAP
12” ROUND
ELBOW
12”
ROUND
DUCT
WALL
CAP
8” X 12”
TO
12” ROUND
TRANSITION
CEILING
JOIST
(24” centers
shown)
12” ROUND
DUCT
GRILLE
MOUNTING
SCREWS
GRILLE
SCREW
discharge position.
Ventilator factory-
shipped
in horizontal
MOUNTING BRACKETS
factory-shipped in position
for ½” ceiling material.
8” X 12” TO
12” ROUND
TRANSITION
FINISHED
CEILING
MATERIAL
GRILLE NUT
(Install into
square holes
in housing)
MOUNTING (New Frame Construction)
WIRING
DUCTING (Horizontal blower discharge)
MOUNTING (Existing Frame Construction)
Factory-shipped unit installed in new construction.
Ventilator can be wired from outside of housing.
Use UL approved connectors to wire per local codes.
Two ways to connect ductwork to a factory-shipped unit.
Factory-shipped unit installed in new construction.
IMPORTANT:
Remove shipping tape from damper
Remove the shipping tape from the damper flap and make sure
that damper flap opens and closes freely inside the ductwork. Use
duct tape to make ductwork connections secure and air-tight.
by others
by others