S&P JENcoFAN EO, Инструкция по установке, эксплуатации и обслуживанию

Страница: 2 / 16

2
INTRODUCTION:
DO NOT INSTALL, USE OR OPERATE THIS EQUIPMENT UNTIL THIS MANUAL
HAS BEEN READ AND UNDERSTOOD. READ AND SAVE THESE INSTRUCTIONS
FOR FUTURE USE.
This document is the property of the owner of this equipment and is required for future
maintenance. Leave this document with owner after installation or service has been
completed.
It is the responsibility of the purchaser to assure that the installation and maintenance of this
equipment is handled by qualified personnel experienced in such work and equipment.
We strongly suggest hood Installation should only be performed by a qualified and
licensed mechanical contractor who is familiar with the level of involvement for proper
installation. Ensure proper safety precautions are taken, permits are obtained, and code
requirements are met.
Contact your local representative should you need further information.
SHIPMENT AND RECEIVING:
Prior to shipment, all fans have been thoroughly inspected and tested.
All equipment shipped from S&P is skidded or crated to fully comply with trucking
requirements. Inspect all shipments carefully for damage. THE RECEIVER MUST
NOTE ANY DAMAGE ON THE CARRIER’S BILL OF LADING AND FILE A CLAIM
IMMEDIATELY WITH THE FREIGHT COMPANY, IN THE CASE OF ANY DAMAGE.
Keep a record of all equipment received, including inspection details and date of receipt,
because of the possibility of partial shipments.
If you receive damaged goods, contact your manufacturer’s representative for repair or
replacement service.
HANDLING:
Handle your equipment with caution
STORAGE:
If hoods are stored for any length of time, they should be stored in a clean, dry location to
prevent rust and corrosion. Outdoor storage is not recommended. When outdoor storage is
necessary, they should be protected from the elements.