S&P ALTAIR 120 H, Руководство пользователя

Страница: 14 / 16

14
2.7. ALARM INDEX
Through the LED located in the “A” button on the remote control it is possible to supervise the status of the unit. This
LED will show the alarm in case of a failure or missfunction on the unit. Depending on the risk level of the generated
alarm the unit will stop for safety reasons.
Priority Alarm LED Action
1 Extract fan error 1 red blink unit stops
2 Supply fan error 2 red blinks unit stops
3 Supply air temperature <5ºC 4 red blinks unit stops. Every 2 hours the unit starts for
5 minutes to check if conditions allow normal
operation.
4 Humidity sensor 5 red blinks normal operation
5 ODA sensor error (fresh air) 7 red blinks normal operation
6 SUP sensor error (supply air) 8 red blinks normal operation
7 ETA sensor error (extract air) 9 red blinks normal operation
8 EHA sensor error (exhaust air) 10 red blinks normal operation
9 Filter alarm Red, continous after 60 days the unit stops if fi lter is not
changed an alarm reseted
2.8. GENERAL DATA
Height 850 mm
Width 550 mm
Depth 170 mm
Connection Ø 95 mm
Weight 20 kg
Material EPP body; front cover plate painted in white
Drain ¾” (drainpipe)
Power supply 230 V AC, 50 Hz
Maximum consumption 55 W
Airfl ow 120 m³/h
Radiated noise LwA 52,2 dB(A)
Ambient temperature from +10°C to +50°C
Exterior temperature until -18°C
Extract temperature from +10°C to +50°C
Speed control according to the adjusted speed on the remote control
Fans 2 units, forward curved with EC motor
Filters supply G4 /extraction G4
Thermal effi ciency 83%
Protection IP21
Protección IP21