Object and Liquid Entry:
Never put objects of any kind into this STB through openings,
as they may touch dangerous voltage points or short-out parts that could result in a fire or
electric shock. Never spill any liquid on the STB.
Note:
Moisture may be formed inside the unit in the following conditions:
When the unit is suddenly moved from a cold environment or an air-condition room to a
warm place.
Immediately after a heater has been turned on.
In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this problem,
turn on the power and wait about two hours for the moisture to evaporate.
Parts Replacement:
When parts need to be replaced, user should make sure the
service technician use the replacement parts specified by the manufacturer or having the
same characteristics as the original part. Unauthorized replacement may put the unit in
the risk of fire, electric shock or other hazards.
Safety Check:
After all the maintenances and repairs are done, user is required to
request the service technician to conduct the overall safety check to ensure the machine
is in the proper operating condition.
