26
Menu Operations
A dialogue box will occur where you need to enter the password.
After you input the correct password a warning message will be displayed like
the one beside.
If you select “Yes” then all changes you made will be reset to default values.
Make sure you really want to do this!
Press [Exit] in both steps will close the window without resetting the receiver.
NOTE: The default password is 0000.
5.3 S/W Upgrade by OTA
This function can upgrade the software of your receiver through data sent by a
satellite. This option is used by Operator to send you the updated S/W through
satellite for your STB.
1.
Select the satellite and TP or input the TP value and download PID.
2.
Then mark “Start” and press [Enter] to begin the download of the upgrade.
This may need up to 60 minutes. Therefore we suggest using of this
function only if you don’t intent to watch TV during this time.
