SanDisk PROFESSIONAL PRO-BLADE ECOSYSTEM, Руководство пользователя

Страница: 15 / 24

CONNECTING THE PRO-BLADE STATION
Before you begin, make sure your computer system is turned on with
your operating system fully loaded and ready for hardware and software
installation. Then continue with the following steps.
How to Connect a PRO-BLADE STATION
Use the following information to successfully connect a PRO-BLADE STATION device to a host
computer.
CAUTION: Use only the included 100-watt power adapter with the accompanying power connecter
appropriate for your region to power on the PRO-BLADE STATION device.
NOTE: The power cable and Thunderbolt 3 cable are each identified with a unique color to
correspond with the appropriate ports on the PRO-BLADE STATION device.
1. When you remove the power adapter from the box, locate your region's power
connecter. If it is not already installed on the power adapter, remove the
attached power connector, and attach the one appropriate for your region.
2. Connect the included power cable (marked green) to your PRO-BLADE STATION
and the power adapter. Then connect the power adapter to a power source and
the device will power on automatically.
3. Connect the PRO-BLADE STATION device to your computer system with the
included Thunderbolt 3 cable (marked orange).
4. Congratulations! The PRO-BLADE STATION is now ready to use.
Register your SanDisk Professional PRO-BLADE STATION at sandiskprofessional.com/support
PRO-BLADE STATION
SanDisk Professional
User Manual
11