SanDisk G3, Руководство по эксплуатации продукта

Страница: 19 / 22

SanDisk G3 SSD Product Manual
© 2010 SanDisk® Corporation 19 Document No. 80-36-03426 Rev.4
8.
Supported ATA Commands
Command Name Command Code
ATA standard commands
Download Microcode 92h
Execute Device Diagnostic 90h
Flush Cache E7h
Identify Device ECh
Identify Device DMA EEh
Initialize Device Parameters 91h
NOP 00h
Read Buffer E4h
Read DMA C8h or C9h
Read Log DMA Ext 47h
Read Log Ext 2Fh
Read Multiple C4h
Read Sectors 20h or 21h
Read Verify Sectors 40h or 41h
Set Features EFh
Write Buffer E8h
Write DMA CAh
Write Log Ext 3Fh
Write Multiple C5h
Write Sectors 30h or 31h
Write Verify 3Ch
Set Features sub-
commands: Disable Advanced Power Management 85h
Disable look-ahead 55h
Disable reverting to power-on defaults 66h
Disable write cache 82h
Enable Advanced Power Management 05h
Enable look-ahead AAh
Enable reverting to power-on defaults CCh
Enable SATA Feature - software Setting Preservation 10h
Enable SATA Feature- software Setting Preservation 90h
Enable write cache (default: On) 02h
Set transfer mode 03h
Data set management command set
Data Set Management 06h
ATA standard 48-bit address command set
Flush Cache Ext EAh
Read FDMA Queued 60h
Read DMA Extended 25h