– 5 –
1) Fit the holes of hinges
A
to the holes of table
and fix as shown in the figure.
3-3. Installation of the sewing machine head
In case of the pneumatic type, fix sole
-
noid valve installing plate
❶
as well.
WARNING :
To prevent possible accidents caused by the full of the sewing machine, perform the work by two
persons or more when the machine is moved.
A
❶
3-4. Installing the drain receiver and the head support rubber
1) Fix drain receiver
❷
in the installing hole of
table
❶
with two setscrews
❸
.
2) Screw in drain bin
❹
to drain receiver
❷
.
3) Insert sewing machine drain pipe
❺
into drain
bin
❹
.
4) Insert head support rubbers
❻
to machine bed
❼
.
5) Bundle the cables with clip bands
❽
as shown
in the figure. (Excluding air tube)
1. Insert drain pipe
❺
until it will go
no further so that it does not come
off drain bin
❹
when tilting the ma-
chine head.
2. Remove the tape fixing drain pipe
❺
.
❶
❷
❹
❻
❻
❻
❻
❸
❻
❺
❼
❻
❽
