– 64 –
③
Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button list button
B
.
Next, press COPY DESTINATION INPUT button
C
and
the copy destination input screen is displayed.
④
Input the pattern No. of copy destination.
Input the pattern button No. of copy destination with ten keys
D
.
Pattern button No. which is not used yet can be retrieved with
– and + buttons
(
F
and
E
).
In addition, the folder to be stored can be selected with FOLD-
ER SELECTION button
G
.
⑤
Start copying.
When ENTER button
H
is pressed, copying starts. The
copied pattern button No. in the selection state returns to the
pattern button copy (copy source selection) screen after ap-
proximately two seconds.
* Combination data can be copied in the same way.
2-20. Changing sewing mode
①
Select the sewing mode.
When
switch is pressed in the state that the pattern has
been registered, SEWING MODE SELECTION button
A
is displayed on the screen. When this button is pressed, the
sewing mode changes alternately the individual sewing and
the combination sewing. (When the pattern button is not regis-
tered, the sewing mode cannot be changed to the combination
sewing even when the button is pressed.)
* The image of the button of sewing mode selection button
changes according to the sewing mode which is selected at
present.
When individual sewing is selected :
When combination sewing is selected :
C
B
A
D
G
F
E
H
