Instructions for programming
Page 31 of 42
4.3.8 ~ Test
General Menu
⤷
Main machine
⤷
Test
With this menu you can test various systems and components of the vending machine.
Name Submenu
Description
Spiral
» This function is used to test the operation of the vend motors installed in the machine.
» Using the selection buttons
and
it is possible to test individually each shelf
spiral by pressing each time selection button
to start the test
» Pressing the selection button
will automatically start the test program of all
spirals.
Next to the number of motors in tests. OK will appear if it works correctly or NO in case the
motor is not installed or faulty.
» The spirals can be counted in two different ways according to numbering type of the
selections.
See the paragraph "Numbering selections type" on the next page.
Keyboard
» This function allows you to check the correct functioning of the keyboard..
The display shows the number corresponding to the button you pressed.
By pressing button
the display shows the number 10;
By pressing button
the display shows the number 11;
By pressing button
the display shows the number 12.
To return at the test menu press and hold button
for 3 seconds.
Outputs
Light
» Within this submenu you can test the functioning of the light.
Pressing selection button
, the display shows the word "OFF", by
pressing selection button
the LEDs light up and the display shows
"ON" while pressing selection button
the LEDs turn off and the
display returns to "OFF".
Temperatures
» In this function the display will show the actual temperature.
If the probe is disconnected or malfunctioning the display will show an error.
Optical barrier
» This menu display the current status of the optical barrierottica.
To test the optical barrier, drop an object in the delivery eyelet.
If the barrier is working correctly the display show "Detect : YES" for a few moments.
If the display will show "Fault : YES" check the proper alignment of the optical barrier.
4
2
3
1
0
5
2
3
4
*
#
