Sanden Vendo CDU-L R06A2B, Руководство по установке

Страница: 10 / 31

Modifiez le style du titre
4.3. Installation condition
10
2. Install the equipment in a dry and well-ventilated location, where air isn't recycled.
3. Place the equipment in a location sheltered from direct sunlight, heat sources and cold wind. If
exposing the equipment to direct sunlight is unavoidable, protect the device with a canopy.
4. Choose a location where the noise produced by the refrigerating unit will not disturb any close
neighbors. The noisiest parts are located on sides and at the back of the unit.
5. The air outlet must not be directed towards house windows or plantations.
6. Place the equipment on a solid, smooth surface.
7. Place the equipment in a location where dust and debris do not risk being sucked into the
evaporator fins.
8. In regions where significant snowfalls occur, always place the equipment under a roof, a shelter or
a snow-proof tarpaulin.
9. Choose a location that is protected from strong winds,
10. Avoid locations exposed to oil splashes, salt (within 2km from coast), sulfur gas (nearby hot water
springs), volcanic area.
11. To avoid any interference, the refrigerating unit must be installed at a minimum distance of 3 m
from any device producing or receiving electromagnetic waves (e.g. radio).