MAP OPERATIONS
82005-PG-D
SANDEL SN3500 EHSI PILOT’S GUIDE
PAGE
6-9
•
Press [M] to activate menu mode.
•
Press [MAP] to display the MAP menu..
•
Rotate the left knob until “MENU SEL” in the far left column
is highlighted.
•
Rotate the right knob until “MEMORY” in the far right
column is highlighted.
Storing Settings into Preset Memories 1-4
•
Rotate the left knob until “S COPY TO” in the far left column
is highlighted.
Figure 6-5 Storing settings
•
Map memory "S COPY TO"
•
Rotate the right knob and select one of the four map
memory locations. Press the right knob and the current
scratchpad settings will be stored under the specified map
memory number, the unit will exit the menu, and return to
normal operation.
Removing a Map Memory from the Rotation Sequence
Individual map memory settings (including the scratchpad) can be
cleared in order to reduce the number of map memories in the MAP
button rotation sequence. This is done using the CLEAR function.
To access the “CLEAR” map memory:
•
Access the Map Memory menu as described previously.
•
Rotate the left knob to highlight “MENU SEL”.
•
Rotate the right knob until “MEMORY” in the right column is
highlighted.
MAP OPERATIONS
82005-PG-D
SANDEL SN3500 EHSI PILOT’S GUIDE
PAGE
6-10
•
Rotate the left knob to highlight “CLEAR”
Figure 6-6 Removing map memory
•
Map memory "CLEAR"
•
Rotate the right knob to select the desired map memory
location to be cleared.
•
Press the right knob to clear the map settings from that
memory location. The center column will display the
cleared memory location.
•
Repeat as necessary to clear additional map memory
locations.
•
Press [M] to exit the menu and return to normal operation.
The memory location(s) that were cleared will be skipped in
the rotation sequence.
Restoring Default Settings
The default settings can be restored at any time. The default
settings for individual map memory locations can be restored or all
of them can be restored at once. Note that this will erase any
previously stored settings. This is done using the “DEFAULT”
function.
To access the “DEFAULT” map memory:
•
Access the Map Memory menu as described previously.
•
Rotate the left knob until “DEFAULT” is highlighted in the far
left column. The map memory locations plus “ALL” will be
displayed on the right.
