S&C Instruction Sheet 1072-570
5
Test Demonstrations
The following SpeedNet network tests are described in these instructions:
• Set up the first radio and change its IP address .
• Establish a two-node network—
point-to-point
• Perform single-link latency test with a payload of 32 bytes and 300 bytes
• Perform a bandwidth test using Iperf
• Establish a three-node network
• Observe network entry
• Observe route discovery
• Perform three-node latency test with a payload of 32 bytes and 300 bytes
• Perform a bandwidth test using Iperf, check route optimization, and
alternate routing
• Establish a four-node network—
mesh
• Observe network entry
• Observe route discovery
• Route optimization
• Alternate routing
• Establish a five-node network—
point-to-multi-point
• Observe network entry
• Observe route discovery
• Route optimization
• Alternate routing
Overview
