6
Lamp indications
Advanced Setup (General Setup)
Advanced setup enables you to define spe-
cific settings for your network’s security
policy, data traffic, etc. This requires spe-
cialised knowledge, including network tech-
nologies and security policies, and is only
recommended for users with experience in
these areas. These settings are not typically
required for standard setup.
1. Start your Internet browser (e.g. Inter-
net Explorer
®
)
2. Enter
“http://192.168.2.1”
in the
browser’s address bar and press
“Enter”
.
3. In the “
Username
” field, type
“admin”
.
4. In the “
Password
” field, type
“1234”
.
5. If you want this to be remembered next
time you log on, check the box
“Remember password”
. Click
“OK”
.
6. Click the
“General Setup”
button.
ENG
L
IS
H
LED Colour
Status
Description
PWR
Green
On
The router is on.
WAN—10/100M Green On
Off
100 Mbit/s connection active
10 Mbit/s connection active
WAN—LNK/ACT Green On
Flashing
Off
WAN port connection.
WAN port transmitting data.
No WAN port connection.
LAN—10/100M Green On
Off
100 Mbit/s connection active.
10 Mbit/s connection active.
LAN—LNK/ACT Green On
Flashing
Off
LAN port connection.
LAN port transmitting data.
No LAN port connection.
