4
WAN Type
Enter the type of connection used by
the router.
1. Select “
Cable modem (Dynamic IP)
”
if you have a cable modem with
dynamic IP.
•
Host name:
Can be set to any name
unless specified by your Internet service
provider.
The MAC address is automatically set to
the MAC address of your cable modem.
This should not be changed unless speci-
fied by your Internet service provider.
•
Clone MAC address:
This button can
be used to specify the MAC address of
the computer’s network card as the
actual MAC address of the router.
•
When your changes are complete, click
“OK”
. The router will then confirm the
changes. Click
“OK”
.
•
Close the window by clicking the cross at
the top right corner.
2.
Select
“Fixed-IP xDSL”
if you have
an xDSL or Ethernet connection with
fixed IP
•
IP address assigned by your service
provider:
Enter the IP address assigned
by your Internet service provider.
•
Subnet mask:
Enter the “subnet mask”
assigned by your Internet service pro-
vider.
•
DNS address:
Enter the DNS addresses
assigned by your Internet service pro-
vider.
•
Service provider gateway address:
Enter the “gateway address” assigned by
your Internet service provider.
•
When your changes are complete, click
“OK”
. The router will then confirm the
changes. Click
“OK”
.
•
Close the window by clicking the cross at
the top right corner.
3. Select
“Dial-up xDSL (PPPoE)”
if you
have an xDSL/FWA connection that
uses PPPoE.
•
User name:
Enter the username as-
signed by your Internet service provider.
•
Password:
Enter the password assigned
by your Internet service provider.
ENG
L
IS
H
