2
ENGLISH
1 Introduction
Sandberg 2in1 Bluetooth Keyboard easily
converts your tablet or mobile phone into a
laptop. You will get a much better hand
position and be able to type faster with
fewer typos. The clever 2in1 Bluetooth
feature enables a simultaneous connection
of two devices and easy switching between
them. The keyboard has a built-in
rechargeable battery, so you don’t need to
worry about expensive and cumbersome
battery changes.
1.1 Indicator-LEDs, jack and keys:
2 Use
2.1 Charging, indicator and ON/OFF key:
Connect the enclosed USB cable between
the keyboard’s micro-USB port and a USB
port, e.g. on a computer or mobile charger
to charge the device.
The LED marked with a battery icon will
blink with a red light during charging and
turn off when the battery is fully charged.
We recommend that you fully charge the
battery before using it for the first time.
Charging time is approx. 2 hours. This LED
will blink again when the battery is almost
running out and charging is required again.
The keyboard will enter “Sleep Mode”
after 10 minutes without activity and can
be activated again by hitting a random key.
We recommend completely turning off the
unit on the ON/OFF switch on the right side
of the keyboard when it isn’t used for a
period of time.
2.2 Connection to 1 or 2 Bluetooth units:
1) Turn on the keyboard using the
“ON/OFF”
switch on the right hand side.
2) LED for Bluetooth channel 1 will briefly
blink with a blue light.
3) Hold the
“Fn”
-key and
“1”
-key down at
the same time for 3-4 seconds until the
blue light starts blinking again to
indicate that the keyboard is now in
“Pairing Mode”.
4) On the unit that you wish to connect to
the keyboard, you now go to settings
and look for the Bluetooth set-up. Here
you select “Search for Bluetooth Units”.
After 20-30 seconds, “Sandberg
Keyboard” will appear on the list of
units. You now need to choose pairing it
with this by hitting it on the list.
5) Your unit will now produce a numerical
code of 4 to 8 digits that you need to
write on the Bluetooth keyboard and
press
“Enter”
. The units are now
connected.
6) If you want to connect 2 different units
simultaneously, e.g. both a mobile
phone and a tablet, you repeat the
process 1-5, but begin by choosing
Bluetooth channel 2, by pressing
the
”Fn”
-key and the
”2”
-key down at
the same time.
Power switch
Charging interface
Caps lock
bluetooth
channel 1
bluetooth
channel 2
low battery
charging
