S&B Filters 76-6000, Инструкция по установке

Страница: 3 / 18

/
• Disconnect product from power source before servicing. Product is designed to filter
approximately 99% of solid particulate, such as dirt and dust. No filtration device is 100%
effective, and users may still experience distribution of dirt/dust within their helmet. To minimize
this experience, ensure connection of the product to user helmet at either of three locations.
Directly on the helmet at the top right, top left, or top center ports. Connection of the product to
another location on the user helmet may increase the risk of use inhalation or eye exposure to
dirt, dust, or other solid particulate matter.
Product is designed for use in conjunction with an ATV’s operating manual, and state and federal
law.
• Keep your seat belt fastened and wear a helmet while operating the vehicle.
• Improper installation, maintenance or operation could cause serious injury or property damage.
Periodically check the following:
• the Helmet PS exhaust fan and blower fan making sure they are working properly and blowing
out air like when it was new.
• the fasteners of the Helmet PS assembly making sure they are tight and secured.
• the mounting brackets, straps and fasteners making sure they are tight and secured.
• the wire harness for any signs of wear making sure it is secured and away from any hot or
moving components.
Caution: The S&B Helmet Separator is not a respiratory system and is not capable of filtering
100% of particulate matter, including dust. Dust, dirt, and other particulates may be inhaled by the
user while using this device.
PARTS LIST