S&B Filters 76-6000, Инструкция по установке

Страница: 2 / 18

/
Fresh Air Hose Kit
Hose Hanger Kit
Strap Kit
Warnings
This equipment should be installed, adjusted, and serviced by personnel familiar with the
construction and operation of this type of equipment and the hazards involved. failure to observe
this precaution could result in severe injury. read this manual thoroughly and make sure you
understand the procedures before you attempt to operate this equipment. the purpose of this
manual is to provide you with information necessary to safely operate, maintain, and troubleshoot
this equipment. do not use this equipment for any reason other than its intended purpose. failure
to follow these instructions will void any warranty. keep this manual for future reference. the
information contained in this manual is subject to change without notice. If you are a Technician
installing the Helmet PS for the customer, please remember to give the instruction sheet included
with this kit to the customer. Verify that the customer has access to all the information required
for proper use of the Helmet PS..
Product will intake and expel both air and loose materials with high force and velocity. Install
product by affixing to the rear upper or rear lower roll bar and ensure the air inlet is not blocked.
• If using product with only one rider, place provided rubber cap over helmet air output port not
in use. Failure to do so may result in low pressure and low flow to the port that is in use. It will
also lead to possible contamination of the clean air chamber resulting in a greater chance of
debris entering the connected helmet.
• Do not place face, hair, extremities, clothing, or other loose material in front of air inlet or outlet
during use.
• Install product by affixing to the rear upper or rear lower roll bar to avoid placing hair,
extremities, clothing, or other loose material in front of air inlet during use.
Moving parts are sharp and could cause personal injury.
• Keep fan safety cages, blower outlet, and exhaust cover in place while operating and after
service.
Various Sizes
(https://www.sbfilters.com/particle-separator/accessories/hose-kit)
Various Sizes
(https://www.sbfilters.com/particle-separator/accessories/hanger-kit)
Various Sizes
(https://www.sbfilters.com/particle-separator/accessories/strap-kit)