11
13. SECURING YOUR VAULT
1.
2.
SECURING YOUR VAULT WITH PROVIDED CABLE
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object as
shown in the figure to the right.
Insert the cable’s metal peg end
into the hole on the side of the
vault while still open.
From the inside of the vault,
take the cable clip and push it
over the metal peg until fully
secured. Use pliers to seat the
cable clip if needed.
3.
Check the loop to ensure
their is no way it can be
manipulated to be easily
removed from the fixed
object before leaving
unattended.
12. PROPER PLACEMENT AND MOVING OF VAULT
1.
2.
3.
To maximize burglary protection and stability, securing the vault to the floor or
table is recommended.
SA Consumer Products recommends that you store your vault in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes.
To Always ensure the vault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor, use of
a moisture/protective barrier is highly recommended. Failure to do so or exposing
the vault to chemicals or other adverse environments may void the warranty.
St
ep
s 1 & 2
St
ep 3
SAFE
INSIDE
CABLE
CLIP
INSIDE OF VAULT,
PUSH CLIP OVER
END OF CABLE
