AIS-700 User Manual
San Jose Technology, Inc.
|
11F., No.2, Sec. 4, Jhongyang Rd., Tucheng City, Taipei County 236, Taiwan
(R.O.C.)
|
Tel: 886-2-22694456
|
Fax: 886-2-22694451
|
30
7. Trouble Shooting
1. Power LED is not lit on
Please check the power supply (9~30V DC) and the polarity of the supply are correct
(red is positive while black is negative).
2. RX and TX LED do not flash
Please check the installation and connection of VHF antenna. The antenna must be
correctly positioned. Please read the “Installation an AIS VHF Antenna”
3. RX and TX LED are flashing but no data is output
Please check connection of data cable to the PC. Then check the PC application is
assigned to the correct port and baud rate. The correct baud rate is 38400.
4. Error LED
This is a red LED. When the light is on, one of the following status conditions is possible:
1. Transmitter lockout timer (1 second maximum) has operated.
2. GPS is not able to fix the position after 30 minutes.
3. Power Supply is out of range.
4. Background noise level is above the threshold level (-77dBm).
5.
When the system initiation of the AIS-700 fails.
Please turn off the power and restart the AIS-700 after 30 seconds with the "Power On" switch.
Содержание AIS-700
Страница 34: ......