9
SPINNING BRUSH ASSEMBLY, DISASSEMBLY AND wASH
SPINNING BRUSH DISASSEMBLY AND wASH
SPINNING BRUSH ASSEMBLY
Pull tight.
• Push silicone brush from the outer side of spinning
brush and pull ‘inner wing’ in the direction of inside
of the spinning brush with the other hand as shown
to the left.
• Pull it until you cannot pull it any longer.
If unit is not fully assembled, there is a risk of
breakage.
Insert the silicone brush into the spinning brush. The
longer part should face upward. Hold the outer wing
of silicone brush with your thumb and index finger and
insert silicone brush into the groove of spinning brush.
Check the groove of the spinning brush and the
direction of silicone brush.
• As shown to the left, let groove inserts face the
spinning brush.
With cleaning brush, wash inside and outside of
spinning brush under running water. Wash silicone
brush in the same way under the running water.
Detach the silicone brush from spinning brush. As
shown to the left, hold the outer part of silicone
brush with your fingers an pull it out to the arrow
direction. If pulling it by force, silicone brush may
be torn or spinning brush may be damaged.
Remove the spinning brush from juicing screen.
Spinning Brush
Silicone Brush
Cleaning
Brush
2
3
2
1
3
Spinning Brush
Silicone Brush
Brush
Grove
Up
(Longer Part)
Down
(Shorter Part)
1
4DC010251 (2 4PJ12302)_V.01 EUJ808 Series (HI) 2G EU (230 V Omega).indd 9
2014-05-29 오전 11:41:23