San-tron Clarifi, Руководство пользователя

Страница: 6 / 17

5 /16
Instructions with the button /interface /indicators
Name Function Instruction
GPS Interface GPS Signal input
Connect the GPS module to the camera for GPS
signal
USB Interface
1.For camera power
source.
2.Used to adjust the
view angle of
camera.
1. Connect the voltage transformer cable to supply
power to turn on the camera.
2. Connect the voltage transformer cable to supply
power to charge the camera.
3. Connect the unit to the computer with USB cable
to adjust the view angle for of the unit before fixing
the camera.
HDMI Interface Full HD video output HDMI is for HD video output (default read-only ）
SOS Button
Pressed button to
lock the files
Press SOS button under recording to lock the files
and protect them from cycle covering.
Indicators
1.Boot indication
2.Charging indication
3.Recording
indication
1. Blue indicator turns on means the battery is
charging, and when fully charged, the camera will
turn off.
2. Red indicator turns on when booting.
3. Red indicator flash when recording.
TF Card Slot Memory card slot
Insert the TF card to the card slot with the metallic
pins side towards the front of the camera. Then lock
the slot with the screw. Seal the screw with a “Clarifi”
fragile label to secure the TF card. (Authorized
personnel only
）
RESET Reset function
When the red indicator stops flash during recording
and the unit crashes press the RESET button to
restart