2
INITIAL SETUP
1. Insert batteries into the battery compartment located beneath the scale.
2. Place the stainless steel plate on the scale.
WEIGHT MEASUREMENTS
1. Press the
On/Tare/Off button to turn on the scale.
2. Press the
g/oz button to change units of measure.
3. Place an item on the scale in the center of the platform.
TARE (ADD & WEIGH)
Ignore the weight of a container:
1. Turn on the scale and place the container on the platform.
2. Press the
On/Tare/Off button, and zero weight will display.
3. Add items into the container to be weighed.
Find the individual weight of multiple items in one container:
1. Press
On/Tare/Off to reset the scale back to zero weight.
2. Add additional items to be weighed.
3. Repeat steps 1-2 for additional items.
Reset the scale back to zero weight:
1. If nothing is on the scale and it does not read zero weight, press the
On/Tare/Off button to reset the scale back to zero weight.
ATTENTION! The scale will tare any amount of weight. Once the total weight
actually on the scale reaches the maximum capacity of 13 pounds (6 kg) the
overload warning code (EEEE) will display.
AUTOMATIC SHUT-OFF
The scale will turn off after 5 minutes of inactivity to save battery.
OVERRIDE AUTOMATIC SHUT-OFF
A switch to over-ride the auto shut-off is located inside the battery compartment.
Turn the switch “
ON” to over-ride the auto shut-off feature.
OPTIONAL 9-VOLT WALL ADAPTER AVAILABLE
The adapter (9VAD) is available at www.sanjamar.com.
