the water inlet and fill with water.
- Use the presser to push into the tube.
2. If the water tank empties, no coffee will
come out. When this happens:
- Turn off the machine.
- Fill the water tank.
- Turn on the machine and put the “hot wa-
ter” function.
- Place a cup under the steam wand and
press the one cup button to get hot water.
- Wait a little for the machine to cool down
and switch to “coffee”.
3. MAINTENANCE & CLEANING
Warnings:
• Do not immerse the coffee machine in
water or pour water on it directly.
• Before cleaning the machine, be sure to
unplug the power cord.
• Do not use strong detergent, sharp ob-
jects, brushes or other objects to clean
the coffee machine.
• Dry with a clean towel, cloth or paper and
assemble all parts. Clean the coffee spout
and the inside of the machine regularly
with a damp cloth.
To clean the steam tube, use at least
100 ml of hot water and then pour a cup of
hot water using the handle.
1. Have the function wheel in the “coffee”
position before always activating the ma-
chine.
2. Install and rotate the filter to the correct
position.
3. Lift the lid of the water tank. Add purified
water to the tank up to the Max mark. The
temperature of this water must not exceed
35ºC. Replace the water tank cap.
4. Plug into an electrical outlet.
5. Press the power button. All indicator
lights will flash and the machine will heat
up the water. Once finished all the indicator
lights will be solid.
TO CLEAN THE STEAM TUBE
1. Place a mug with a ca-
pacity greater than 100
ml under the steam tube.
2. Turn the function
knob to the “hot water”
function.
3. The tube pours hot wa-
ter to fill 100 ml.
Note: If you keep pouring hot water contin-
uously for 120 seconds without performing
any other operations, the appliance will
stop automatically. If you want to continue,
repeat steps 1 and 2.
TO CLEAN THE PORTABLE FILTER
1. Place a cup on the drip tray.
