![background image](http://html1.mh-extra.com/html/san-ignacio/00182/00182_instruction-manual_3794648012.webp)
4. After finishing, turn the function knob
back to “coffee” function.
Note: The machine will stop producing
steam if it continues to run for 120 seconds
without any operation. If you want to contin-
ue foaming, you must repeat steps 3 and 4.
Warning: Please DO NOT brew coffee until
the machine cools down a bit after this func-
tion as the machine will be at high tempera-
ture and the coffee will taste bad.
PREPARING HOT WATER
1. Put a cup under the steam tube.
2. Turn the function knob to the “hot water”
function. The one cup button indicator light
will blink while you prepare hot water.
3. After obtaining the desired hot water,
turn the function knob to the coffee func-
tion.
Note: The machine will stop producing hot
water if it continues to run for 120 seconds
without any operation. If you want to con-
tinue, repeat steps 2 and 3.
STANDBY MODE
The machine will turn off after 15 minutes
without being used to save energy.
To activate again, press the power button.
Standby mode can be deprogrammed as
follows:
1. Press the one and two cup buttons at the
same time. While inserting the plug of the
appliance into a socket. The power button
light will be on.
2. Press the one cup button until its indi-