Tilt
(see Figure 2.)
Remove the clevis pin & R clip and install them into the lower hole.(a)
Remove the security pin & clip while supporting the load.(b)
Slowly and carefully lower the rack.(c)
Caution!
The tilt feature requires 2 PEOPLE to operate.One person MUST support the load while
the other removes the security pin & clip. Do not put any part of your body under the rack while
tilting. Be careful to avoid hitting your head.
Storage
(see Figure 3.)
Unload your e-bikes by following Unloading steps.
Remove the security pin & clip of the mast and fold down the mast.
Then insert the security pin & clip in place.
Buckle the strap to secure the mast.
Remove the clevis pin & R clip.
Fold up the e-bike rack.
Install the clevis pin & R clip into the higher hole.
Figure 2.
Figure 3.
Removal
Unload your e-bikes.
Remove the hitch bolt & nut.
Remove the rack from your vehicle.
Store the rack in a safe place.
a
b
c
