Samyung SDF-310, Руководство по установке и эксплуатации

Страница: 8 / 59

8
2. Before handle cables (Safety instruction)
3. Before handle the vibrator and water temperature sensor
Caution

Use the regular power code to prevent heating and fire.

Do not leave the equipment as unplugged. Wet plug become short circuit and
cause of heating and fire.

Install the cables to not interfere steering. If foot or steering device are caught it
cause incident.
★ Do not put heavy thing on the cable or bend the cable excessively.

Do not disassemble or reorganize the code. It can cause heating, fire and
electrical shock.

Do not use damaged code. It can cause fire or electrical shock.
Warning

Do not pull the cable when unplug.
★
Holding the plug body and pull.

Be careful not to pinch the cables when install.
Danger

Operation on the ocean is very unstable and dangerous. Installation or repair of
the vibrator or water temperature sensor should be done on the land, after fix the
vessel body securely. Otherwise, severe injury can be caused.
Warning

Ventilate enough the cabin when use solvent such as glue. Volatile gas of solvent
can result poisoning.

Do not unplug or insert the code of vibrator while the equipment is turned on. It
can cause electrical shock or disorder.

Do not use electrical tool with wet hand. It can cause electrical shock.

Do enough water proof process after installation of thru-hull equipment. If not, it
can cause water leaking and distress.