Samyung ENC SRG-400, Инструкция по эксплуатации, Страница: 47 / 64

- 87 -
∙ARQ/FEC 4- or 5-digit ID
∙Group-FEC 4-or 5-digit ID
∙ARQ/FEC 9-digit ID
∙Group-FEC 9-digit ID
∙Collective FEC Receiving
∙Answer Back Code - answer code
∙Maximum FEC Error rate- Set maximum FEC error rate when receiving FEC.
※If FEC Error rate exceed maximum value , receiving is completed automatically.
∙NAVTEX Station Selection - select NAVTEX receiving that worldwide
transmitting stations broadcasted.
∙NAVTEX Message Selection - select the kind of NAVTEX Message desired
receiving.
∙NAVTEX ID Data Clear - clear NAVTEX ID Data.
※NAVTEX ID Data - Storaged message ID for preventing from printing two times,
when same message continues to receive.
∙ID Printing - Output to printing own station ID.
(2) Setting ARQ/FEC 4 or 5 digit ID
* Set when installation, user cannot modify.
(3) Setting Group-FEC 4- or 5 digit ID
* User cannot modify.
(4) Setting ARQ/FEC 9-digit ID
* Set when installation, user cannot modify.
(5) Setting Group-FEC 9-digit ID
* User cannot modify.
(6) Setting The Collective FEC answer back code
* After previous (1), operate as follows.
a) Move the cursor to the Collective FEC Receiving using up/down arrow keys.
b) Press [ENT] key to toggle on between On and Off.
(7) Setting Answer Back Code
* After previous (1), operate as follows.
a) Move the cursor to the Answer Back Code using up/down arrow keys.
- 88 -
b) Press [ENT] key.
c) Input Code and then press [ENT] key.
(8) Setting Maximum FEC Error rate
* After previous (1), operate as follows.
a) Move the cursor to the Maximum FEC Error Ratio using up/down arrow keys.
b) Press [ENT] key.
c) Input error rate(1-100) by number key and then press [ENT] key.
(9) Setting NAVTEX Station Selection
* After previous (1), operate as follows.
a) Move the cursor to the NAVTEX Station Selection using up/down arrow keys.
b) Press [ENT] key.
c) Move the cursor to desirable item using left/right arrow keys and press [ENT] key
then, '0' , 'X' are converted.
d) Press [ESC]key, set current value and then return to previous display.
(10) Setting the kind of NAVTEX Message
* After previous (1), operate as follows.
a) Move the cursor to the Maximum NAVTEX Message Selection using up/down arrow
keys.
b) Press [ENT] key.
c) Move the cursor to desirable item using left/right arrow keys and press [ENT] key
then, '0' , 'X' are converted.
d) Press [ESC]key, set current value and then return to previous display.
(11) Clear NAVTEX ID Data
* After previous (1), operate as follows.
a) Move the cursor to the NAVTEX ID Data Clear using up/down arrow keys.
b) Press [ENT] key.
c) Select [Yes] and then press [ENT] key.
(12) ID Printing
* After previous (1), operate as follows.
a) Move the cursor to ID Printing the using up/down arrow keys.
b) Press [ENT] key and then print ID
7.14 The test of TELEX mode
(1) Setting NBDP Test
a) Press [F9] key to call sub-menu.
b) Move the cursor to NBDP test using up/down arrow keys and press [ENT] key to display
the following screen.
∙Mark Transmission 40 sec. - transmit mark for 40 seconds
∙Space transmission 40 sec. - transmit space for 40 seconds
∙Dot transmission 40 sec. - transmit dot for 40 seconds