Samyung ENC SRG-400 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 64

Samyung ENC SRG-400 Скачать руководство пользователя страница 38

- 69 -

∙Mark transmission 40 sec. - transmit mark for 40 seconds
∙Space transmission 40 sec. - transmit space for 40 seconds
∙Dot transmission 40 sec. - transmit dot for 40 seconds
∙Loop test - test DSC loop
∙Printer test - test the printer
∙Remote-Dist test - test the remote distress controller.

(2) Setting the Mark transmission

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Mark transmission' with the up/down arrow keys and press [ENT]

key.

b) The DSC Mark frequency is transmitted for 40 sec. To stop, press [CLR] key.

(3) Setting Space transmission

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Space transmission' with the up/down arrow keys and press [ENT]

key.

b) The DSC Space frequency is transmitted for 40 sec. To stop, press [CLR] key.

(4) Setting Dot transmission

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Dot transmission' with the up/down arrow keys and press [ENT] key.
b) The DSC Dot frequency is transmitted for 40 sec. To stop, press [CLR] key.

(5) Loop test of DSC

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Loop test' with the up/down arrow keys and press [ENT] key.

(6) Printer test

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Printer test' with the up/down arrow keys and press [ENT] key.
b) Check the printer and quality of printing.

- 70 -

(7) Remote Distress & Alarm test

* Follow the above (1) procedure then the next steps
a) Move the cursor to 'Printer test' with the up/down arrow keys and press [ENT] key.
b) Press the Distress key of Remot Distress & Alarm, when be displaying the "Press

Remote-Distress-

key" on the screen.

c) Press the Reset key of Remot Distress & Alarm, when be displaying the "Press

Remote-Distress-

key" on the screen again.

d) when be displaying the "OK...(Press anu key)" on the screen, it's Remot Distress & Alarm

is

operating normalization so return to the prescreen with press any key.

«
...
36
37
38
39
40
...
»

Содержание SRG-400

































































Отзывы:

Нет отзывов