Samyung ENC SI-30A, Инструкция по эксплуатации

Страница: 52 / 80

4 2
4-2 The method of installation
SI-30A is designed for installing to the existing bridge easily, it shows the occupation of
general system on outer wiring diagram in Annex.
We suggest that all components such as VHF antenna, Plotter, MKD should be installed
According to the instruction as manufacturer provides.
4-3 Main Unit installation
The method of installation SI-30A is as below.
The installation of SI-30A should be considered to approach other outer equipments easily.
3P connector which is placed on back of main unit, is for power supply. It can be connected,
if No.1 is (+), No3. is(-).
The cable of IEC/NMEA DATA should be connected to data port on back of main unit(refer to
outer wiring diagram of SI-30A in Annex).