Samyung ENC N430, Руководство пользователя, Страница: 12 / 32

Installation and Operation Manual 23
3-4-6 S-Map search
This function is available when NAVIONICS
SD card is inserted and NAVIONICS is
selected.
To find port & service
1 Press .
2 Select Find then Port .
3 Press or to select a port then .
4 After searching process, select a nearest
port in the list then the cursor will place
on the portyou selected on the chart
window.
NAVIONICS Chart does not
support this function.
(See 2-4 for chart selection)
3-4-7 Chart symbols and information
This function is only available when
NAVIONICS SD card is inserted and
NAVIONICS is selected.
Using NAVIONICS Max card allows you to
show different kind of symbols and their
information on chart plotter display. On some
objects such as a port, you can see a picture
of landscape layout.
To display information
1 Move cursor on an icon to display its name.
2 Press
and select Chart info .
3 Move cursor key to highlight an item and
press .
4 Information related to the item appears at
the bottom window.
[Chart info]
S-MAP does not support this
function.
(See 2-4 for chart selection)
[Chart symbol Data Box]
3-4-8 Introduction to navigating
Use the navigation chart to plan your course, view map information, and as a navigational
aid.
This unit has two ways of navigating, going straight to a waypoint or following a route (a
group of waypoints).
Installation and Operation Manual 24
3-4-9 Going to a waypoint or to a point on the chart
A waypoint is a particular location on a
voyage whether it is a starting, intermediate
or destination point. A waypoint is the
simplest piece of information your equipment
requires to get you to a destination. In the
shortest distance possible. This unit can save
up to 10,000 waypoints.
Go to Cursor Option
1 Press and select the Chart window.
2 Move the cursor to the destination point.
3 Press
and select Go to cursor to
start navigating.
Goto WPT Option
1 Press and select the Chart window
2 Move the cursor to place cursor on a
waypoint.
3 Press and select Goto WPT to start
navigating.
Cancelling navigating
1 Press and select the Chart icon.
2 Press and select Cancel Goto .
Make sure the course does
not pass over land or
dangerous waters.
3-4-10 Following a route
Often a trip from one place to another
involves several course changes, requiring a
series of route points (waypoints) which you
navigate to, one after another. The sequence
of waypoints leading to the ultimate
destination is called a route. You can save up
to 100 routes and a route may consist of 100
waypoints.
.
Start Route Option
1 Press and select the chart window.
2 Press and select Start Route .
3 Move cursor keys to select a route to start
navigating.
4 Select Forward or Reverse to decide
which direction you want to navigate.
Route Window Option
1 Press and select the routes window
2 In the route window, mover the cursor to
highlight a route you want to start
navigating to.
3 Press and select start
4 Select Forward or Reverse to decide
which direction you want to navigate.
Create Route Option
1 Press and select the chart window.
2 Select New route .
3 Name a route name.
4 Move cursor keys to select a waypoint.
(Repeat this step as much as you need)
5 Press and select Add .
6 Press .
7 Repeat 2-4 steps of Route window option.
Skipping a waypoint
1 Press and select Skip .
2 Repeat above step if necessary.
Cancelling a route
1 Press and select the chart window.
2 Press and select Cancel route .