[ Add on Desk / Desk type ]
2. Add on Desk Height Adjustment
(1) Adjust the height by squeezing the "left and right" lever at the same time as in the above picture.
Warning
· Adjust the cable arrangment of item(Laptop & Monitor) at the highest position.
· Item(Laptop & Monitor) may fall behind if cables are at lowest position.
✖
WARNING
Checksettingconditiontobeabletodisplaytheitem(laptop&Monitor)safely.
✖
WARNING : Do not put hands near the X white adjusting.
Hands may be pinched or trapped. Failure to comply with this
warnning may result in injury.
✖
WARNING
· Damage to mechanism may occur under heavy impact.
· When Moving :
- shift desk to lowest position.
- with two people.
- do not grab adjusting levers.
※ If this warning is ignored, it can occur injury.
✖
WARNING
· Do not access another body part when operates control
handle lever of desk height.
※ If this warning is ignored, it can occur injury.
✖
WARNING
· Do not climb or run on the desk for child.
· Do not adjust desk height if child is on the desk top board.
※ If this warning is ignored, it can occur injury.
✖
WARNING
· Do not lean or press the adjusted desk too hard for long time.
※ If this warning is ignored, it can occur injury.
WARNING
3. Safety
5/8
Handle Lever
※ Please visit "www.shsdeskplus.com" for the newest installation manual.
4/8
*
If you have to withstand a heavier working load, use the
'auxiliary spring'
(This description applies only to Quattro type models.)
*
Two auxiliary springs are located on the side of the product's Styrofoam packaging.
(This description applies only to Quattro type models.)
How to install auxiliary springs
- After lifting the product up to the top, 'a. Ball
stud 'on 'B. Assemble the auxiliary spring 'in the
direction of the arrow.
- Make sure that the up and down direction is as
shown in the figure.
* Appearance of completed installation
a. Ballstud
b. Auxiliary spring
c. Socket
* Removed appearance
Auxiliary spring detachment method
- Raise the product up to the top and then 'c. Socket
'Press 'b' with your thumb. Remove auxiliary spring
in the direction of the arrow.
- Remove the opposite way in the same way.
Allowable load
Average
Basic Mounting
6 ~ 16kg
11kg
Equipped with one auxiliary spring
9 ~ 19kg
14kg
Equipped with two auxiliary springs
12 ~ 22kg
17kg
