[ Add on Desk / Desk type ]
※ Please visit "www.shsdeskplus.com" for the newest installation manual.
Vertical height adjustment (up / down)
Smooth height Control with Gas Lift
Any Stop (freely fixed at desired height)
Eccentricity prevention design
(maintaining balance while leaning)
Adjusting the heightwith the lever
Anti-swaying
Stopper
Safety design
1
· Take the desk out of the box.
· Two people should move it together.
· Possibilty of injury exists if moved alone.
3
Gather and hold the
cable to organize.
Wrap the cables by
the cable zip
Pull down the rest of
cable zip while
wrapping cables
※CableTiesand
CableZips
NOT
INCLUDED
with
the desk.
4
CAUTION
· Orgnize cables at the maximum height position of a desk.
· Objects might fall during up and down operation if the cables
are organized at the Minimum position
2
CAUTION
· Place the objects in the center of a desk.
· If you don't comply with this, you may get injured,
or the objects could fall.
1. How to install "Add on Desk"
3/8
Lift the desk up to the maximum height
by pushing two levers together.
When adjusting the desk, it can be lifted up faster
or lowered because it is designed
for 11~24.3lbs of equipment(monitor or laptop)
weight.
※ In case of purchasing Add on type and legs
· Always two people together when assemble
the desk and leg.
·Possibility of injury exists if moved or assembled alone.
·Followtheassemblysequencefrom①to⑧asshownin
the right picture.
· Tighten the screws to prevent being loosened.
1) How to assemble "Add on Desk Type"
Assemble rubber
feet to both left
and right leg.
Lie down the right leg as
shown on the picture after
assembling rods.
Assemble coupling rod to
the right leg as shown in
the picture.
Assemble the left leg.
Assemble another coupling
rod to the right leg as shown
in the picture.
Place assembled legs as shown in
the picture, and tighten the
screws.
①
④
②
⑤
③
⑥
Material list
-Leg(L/R) : 1pc each
-Couplingrod:2pcs
-Rubber feet : 4pcs
-Screw(for legs) : 8pcs
-Screw(for add on desk) : 8pcs
· Take the desk out of the box.
·Checkthemateriallistafteropeningthebox.
· Assemble the legs two people together.
· Possibility of injury exists if moved or
assembled alone.
· Fasten the screws of the legs with a Philips
screwdriver.
2/8
Maximum height
Minimum height
