Samus SC624GD5, Инструкция по эксплуатации

Страница: 32 / 34

32
In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed. Installing the oven
so that it rests on two strips of wood is preferable. If the oven rests on a continuous, flat surface, there must be
an aperture of at least 45x560mm.
45mm
56
0m
m
The panels of the adjacent cabinets must be made of heat resistant material. In particular, cabinets with a
veneer exterior must be assembled with glues which can withstand temperature of up to 100
℃
In compliance with current safety standards, contact with the electrical parts of the oven must not be possible
once it has been installed.
All parts which ensure the safe operation of the appliance must be removable only with the aid of a tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 metal screws into
the 4 holes located on the perimeter of the frame.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.