SAMUEL JACKSON Humidaire Southwest Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 87

SAMUEL JACKSON Humidaire Southwest Скачать руководство пользователя страница 13

PAGE 11 of 84 HU-SOUTHWEST-1480 GAS-FIRED HUMIDAIRE UNIT

© SAMUEL JACKSON, INCORPORATED 2005 ALL RIGHTS RESERVED

MOISTURE MIRROR II

for remote control & optional automatic control

The HU-SOUTHWEST-1480 Humidaire Unit is compatible with the optional Moisture
Mirror  II,  offering  remote  control  (normally  from  ginner’s  console)  of  the  unit  via  a
CAT-5B Ethernet connection. It has the ability to control up to four 1400 series Samuel
Jackson Humidaire Units and eight 1400 series Samuel Jackson Heaters.

When  the  Moisture  Mirror  II  is  equipped  with  compatible  moisture  sensors  at  various
stages  in  the  ginning  process  it  offers  automatic  dryer  temperature  control.  It  can  also
automatically adjust the water temperature setpoint on the lint moisture Humidaire Unit
supplying  moist  air  to  moist  air  applicators  like  the  Steamroller  and  Moisture  Tracker.
Refer to the Moisture Mirror II manual for more information on features, connections and
compatible moisture sensors.

The START / STOP operations, temperature settings, display of actual temperatures and
information like evaporation rates and run time are displayed on the Moisture Mirror II’s
color  touch  panel.  When  an  ERROR  or  ALARM  occurs,  this  information  is  also
displayed.

To access screens that require a password, 1234 is the default user password. If there is
any question about a making a change to a default setting, press the large question mark
button (“?”).

Press HUMIDAIRES button to go
to screens for Humidaire control

Home Screen for Moisture Mirror II

«
...
11
12
13
14
15
...
»

Содержание Humidaire Southwest
























































































Отзывы:

Нет отзывов