SAMUEL JACKSON HU-SOUTHWEST-1480, Руководство по обслуживанию

Страница: 15 / 87

PAGE 13 of 84 HU-SOUTHWEST-1480 GAS-FIRED HUMIDAIRE UNIT
© SAMUEL JACKSON, INCORPORATED 2005 ALL RIGHTS RESERVED
If automatic “feedback” control of lint moisture is desired and a compatible sensor is
installed, touch the BALE button on the Moisture Mirror II’s home screen. Then press
SETUP button and the screen shown below will appear. Choose the number of the
Humidaire Unit supplying moist air to the lint moisture applicator. The Moisture Mirror
II will automatically adjust the water temperature setpoint to try to maintain the desired
target percent (%) of moisture. The water temperature will not be adjusted above the air
temperature setting.
TIPS
On dry, hot afternoons, adjust the air temperature setting higher if the target % moisture
is not obtained and the Moisture Mirror II has the water temperature setting equal to the
air temperature setting. The maximum air temperature setting is 155
°
F [68
°
C].
Operating the Humidaire Unit at high temperatures will shorten its life.
Press ” ?” button to
access help screens
Press the button
corresponding to the
number of the
Humidaire Unit that
will use the
automatic control. A
green number means
that automatic
control is active.
Bale Moisture Setup Screen