SAMSys SARS MP9112, Руководство пользователя

Страница: 19 / 36

SARS MP9112 Owner’s Manual
11
3. Insert the AC adapter into a power outlet.
4. Insert the power supply cable into the power connector.
Refer to the SAMSys Multi-Protocol Reader Programmer’s Guide
for more information on configuring your reader.
RS-485 Communication Setup
The MP9112 communicates with the SAMSys Interrogator Control
and Concentrator Module (ICCM) using an RS-485 interface. To
set up a reader network with RS-485 communications, perform the
following steps:
1. Insert the 3-pin male plug on the RS-485 cable into the
3-pin connector on the end panel of the reader.
2. Insert the 25-pin female plug on the RS-485 cable into the
25-pin connector on the ICCM.
3. Insert the AC adapter into a power outlet.
4. Insert the power supply cable into the power connector on
the end panel of the reader.