Samsung ZR20 Series, Руководство пользователя, Страница: 12 / 68

English - 12
GETTING READY TO INSTALL
THE FREEZER
Congratulations on your purchase of this Samsung
Freezer.
We hope you enjoy state-of-the-art features and
efficiencies that this new appliance offers.
• Please call installation engineer to install
your new Freezer & then you can get
more information from engineer about the
performance of your Freezer.
• This Freezer must be properly installed and
located in accordance with the manual before
it is used.
• Use this appliance only for its intended purpose
as described in this instruction manual.
• We strongly recommend that any servicing be
performed by a qualified individual.
• Please dispose of the packaging material
for this product in an environmental friendly
manner.
Selecting the best location for the freezer
• A location without direct exposure to sunlight.
• A location with flat floor surface.
• A location with enough space for the Freezer
door to open easily.
50 mm
50 mm
H1
H
87˚
D
W
Model W D H H1
ZR20* 946 556 839 1315
ZR26* 1114 599 814 1339
ZR31* 1125 670 848 1442
• Height of the product may be different
depending on the models.
• Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the Freezer in a place with the
temperature lower than 10 °C.
• When you move the Freezer, unplug and clearly
arrange the power cord. Also secure the glass
shelf and the doors with a tape.
• Pull the unit straight out when installing,
servicing or cleaning behind the Freezer
and push it straight back after work
is complete. Make sure your floor can
support fully loaded Freezer.
• Keep ventilation opening in the appliance
enclosure or mounting structure clear of
obstruction.
FLOORING
For proper installation, this freezer must be placed
on a level surface of hard material that has the
same height as the rest of the flooring. This surface
should be strong enough to support a fully loaded
freezer (or approximately 65 kg). To protect the
floor finish, cut a large section of the cardboard
carton and place it under the freezer where you are
working.
Pulling or pushing the freezer may
damage the floor.
Moving the freezer after installation may
damage the floor.
CAUTION
setting up your freezer