MP3 Encoding
29
Recording Voice
28
1
Press the
REC
button to start voice recording.
Press the
REC
button again to stop the recording and a
voice file is saved.
2
N
N
o
o
t
t
e
e
●
The files are recorded in the order of V001,V002......,
and saved as WAV file in the VOICE folder after recording.
●
If the Memory is full, the Voice Recording is stopped automatically.
●
Voice Recording does not work in FM Mode or when the Line In cable is connected.
To Record Voice
1
Connect the Audio Output port on the external audio source
(or the Line Out port) to the ENC port on the device with the Line cable.
2
Press the
REC
button to start MP3 encoding.
●
If the button is pressed, encoding is paused and if the button is pressed again,
the encoding resumes.
3
If the
REC
button is pressed during encoding, the encoding stops and an
encoding file is created.
●
The files are encoded in the order of L001, L002....
and saved as MP3 file in LINE_ENC folder after encoding.
N
N
o
o
t
t
e
e
●
Bit Rates can be set within the range of 32Kbps~128Kbps.
●
Volume can be adjusted from level 0 to 10 while monitoring the Encoding.
N
N
o
o
t
t
i
i
c
c
e
e
●
Do not disconnect the Line cable during Encoding.
●
If the battery is not charged enough, encoding will not be done.
●
Adjust the volume of the external audio source to a suitable level and encode it.
If the volume level is extremely high, the sound quality may not be good.
✽
To move to other modes from the Voice mode,
refer to page 36 “Changing Mode”.
✽
To move to the other modes from LINE_ENC mode,
refer to page 36 “Changing Mode”.
